Irregular pattern

Help Desk Tickets
1

Hello,

This is the first time when I have 129 flights that I have obtained the following message: * Aug 13, 2025, 18:28:51 Z - “Flight data analysis detected irregular patterns indicating simulated flight behavior. – Penalty Deduction: 100”

Therefore, my flight was not validated : Flight Report:
#0198a497-fec2-779d-af8f-8ca2e0630161
Airplane Rental Mission

I would like an explanation of this problem. Is this a simfly client error? It’s a shame because I also penalize the person I rented the plane from and I lost at least 5 pax.

Thanks you for your answer.

2

Log simfly Client :

2025-08-13 18:15:41.719 [2276] Parsed data ref: sim/flightmodel2/gear/on_groundTrue101int
2025-08-13 18:15:41.719 [2276] Parsed data ref: sim/flightmodel/position/vh_ind_fpmFalse01float
2025-08-13 18:15:41.719 [2276] Parsed data ref: sim/flightmodel/forces/g_nrmlFalse01float
2025-08-13 18:15:41.719 [2276] Parsed data ref: sim/cockpit2/gauges/indicators/roll_AHARS_deg_pilotFalse01float
2025-08-13 18:15:41.719 [2276] Recieved 40 data refs to parse
2025-08-13 18:19:21.443 [20584] SimFly XPlane Plug-In disbled
2025-08-13 18:19:21.443 [20584] start CleanUpNetworkResources()
2025-08-13 18:19:21.443 [20584] [Sender] DoConnection set to 0
2025-08-13 18:19:21.443 [20584] [Sender] CloseSocket() succeeded
2025-08-13 18:19:21.443 [20584] [Receiver] DoConnection set to 0
2025-08-13 18:19:21.443 [20584] [Receiver] CloseSocket() succeeded
2025-08-13 18:19:21.443 [20584] CleanUpNetworkHandlers()/WSACleanup() succeeded
2025-08-13 18:19:21.443 [2276] [Receiver] Receive() failed with error: 10053
2025-08-13 18:19:21.443 [2276] [Receiver] CloseSocket() succeeded, socket already closed
2025-08-13 18:19:21.659 [20584] SimFly XPlane Plug-In stop (unload dll)
2025-08-13 18:19:21.659 [20584] Cleaning up Logging resources

2025-08-13 19:43:19.572 [6972] Plug-In start (dll loaded)
2025-08-13 19:43:19.572 [6972] Auto start client with sim active
2025-08-13 19:43:19.572 [6972] SimFly XPlane Plug-In start (load dll)
2025-08-13 19:43:19.572 [9364] Launching executable at: C:\Program Files\SimFlyClient\SimFlyClient.exe args: XPlane
2025-08-13 19:43:19.576 [9364] Executable launched successfully.
2025-08-13 19:43:20.043 [6972] SimFly XPlane Plug-In enabled
2025-08-13 19:43:20.043 [6972] start InitNetworkResources()
2025-08-13 19:43:20.043 [6972] InitNetworkHandlers()/WSAStartup() succeeded
2025-08-13 19:43:20.043 [6972] [Sender] DoConnection set to 0
2025-08-13 19:43:20.043 [6972] [Sender] CloseSocket() succeeded, socket already closed
2025-08-13 19:43:20.043 [6972] [Receiver] DoConnection set to 0
2025-08-13 19:43:20.043 [6972] [Receiver] CloseSocket() succeeded, socket already closed
2025-08-13 19:43:20.043 [6972] Global client execution context id refreshed to: 1
2025-08-13 19:43:20.043 [6972] [Sender] IpAddress set to 127.0.0.1
2025-08-13 19:43:20.043 [6972] [Sender] PortNumber set to 31001
2025-08-13 19:43:20.043 [6972] [Sender] using TCP protocol to send
2025-08-13 19:43:20.043 [6972] [Sender] ClientsExecutionContextId set to: 1
2025-08-13 19:43:20.043 [6972] [Sender] DoConnection set to 1
2025-08-13 19:43:20.043 [6972] [Receiver] IpAddress set to 127.0.0.1
2025-08-13 19:43:20.043 [6972] [Receiver] PortNumber set to 31001
2025-08-13 19:43:20.043 [6972] [Receiver] using TCP protocol to send
2025-08-13 19:43:20.043 [6972] [Receiver] ClientsExecutionContextId set to: 1
2025-08-13 19:43:20.043 [6972] [Receiver] DoConnection set to 1
2025-08-13 19:43:20.044 [3972] [Sender] InitiateNetClientTerminal()/Socket() succeeded
2025-08-13 19:43:20.044 [9188] [Receiver] InitiateNetClientTerminal()/Socket() succeeded
2025-08-13 19:43:20.044 [9188] [Receiver] DoConnect() succeeded
2025-08-13 19:43:20.044 [3972] [Sender] DoConnect() succeeded
2025-08-13 19:43:20.044 [3972] [Sender] DoOnAfterConnect() succeeded
2025-08-13 19:43:20.044 [3972] [Sender] Enter sender interaction
2025-08-13 19:43:20.044 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:43:20.044 [9188] [Receiver] DoOnAfterConnect() succeeded
2025-08-13 19:43:20.044 [9188] [Receiver] Enter receiver interaction
2025-08-13 19:43:31.068 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:43:42.094 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:43:53.106 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:44:04.126 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:44:15.141 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:44:26.161 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:44:37.175 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:44:48.195 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:44:59.218 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:45:10.245 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:45:21.263 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:45:32.278 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:45:43.289 [3972] [Sender] No data to send sleeping for: 10000 ms
2025-08-13 19:45:47.990 [6972] SimFly XPlane Plug-In disbled
2025-08-13 19:45:47.990 [6972] start CleanUpNetworkResources()

3

Hi, thanks for your report.
Today we carried out several deployments to optimize SimFly, which also included new mission control systems. We will look into the situation further and update you as soon as possible.
Thanks as well for the data you provided.

4

Hi,
we’ve reviewed your flight’s behavior and, for some reason, there was an anomaly in one of the data variables provided by the flight simulator.
The flight has now been reprocessed, and the PAX have been restored. :slight_smile:

5

Many thanks for your speed and correction of the problem.

1 Like
6

This topic was automatically closed after 30 days. New replies are no longer allowed.